Electricity is NOT a part of electromagnetic spectrum.
An electromagnetic spectrum contains electromagnetic radiations arranged according to frequencies and wavelength.
<h2>Further Explanation
</h2><h3>Electromagnetic waves </h3>
- Electromagnetic waves are types of waves that do not require a material medium for transmission.
- These waves are mostly transverse in nature, which means the direction of transmission is perpendicular to the direction of vibration of particles.
- They include, light waves, radio waves, x-rays, infra-red, etc.
<h3>Electromagnetic spectrum
</h3>
- An electromagnetic wave shows electromagnetic waves arranged according to frequencies and wavelength.
- Electromagnetic spectrum contains electromagnetic waves: Gamma rays, x-rays, Ultraviolet, Visible light, infra-red, microwaves, and radio waves.
- The electromagnetic spectrum is divided into various sections based on wavelength, with gamma rays having the shortest wavelength and radio waves having the longest wavelength.
- The part of the electromagnetic spectrum that we can see using our naked eyes is called the visible light spectrum.
- In order of frequency, the radio waves have the lowest frequency while gamma rays have the largest frequency.
<h3>General characteristics of electromagnetic waves </h3>
- They travel with the speed of light (3.0 x 10^8 m/s)
- They possess energy that is given by; E =hf, where h is the plank’s constant and f is the frequency.
- They are transverse in nature, and therefore, the wavelength is measured between successful crests or troughs.
- They can travel through vacuum
Keywords: Electromagnetic spectrum, electromagnetic waves.
<h3>Learn more about: </h3>
Level: High school
Subject: Physics
Topic: Electromagnetic spectrum
What is it about, I can help.
Factors affecting friction
The intensity of friction depends on following factors: i) The area involved in friction. ii) The pressure applied on the surfaces. Force = Pressure ´ Area Frictional force will increase, if the area of contact will increase or if pressure applied on the surface increased.
Methods to reduce friction
i) Polish the contact surface. ii) Put oil or grease so that it fills in the small gaps of the flat parts. iii) Use ball bearings to reduce area of contact between rotating parts.
Lubrication
Following methods can be used to reduce friction: Oil is either thin or viscous. It depends upon SAE No. of oil. (SAE means Society of Automotive Engineers). If we use very viscous oil, it does not reach all the parts. Very thin oil will flows away easily and gets wasted. Grease is used in such cases. It is generally used around ball-bearing. Normal grease or oil is never used where there is high pressure, high temperature and high speed. Special lubricants are used in such cases. In cold season the oil becomes thick and in hot season it becomes thin. Therefore selection of lubrication also depends on the season. It is always advisable to refer operating manual of the equipment before selecting the lubricant.
250 kg*m/s
Momentum is found by multiplying mass by velocity
25*10=250
Answer:
four-year degree Right arrow. graduate school Right arrow. license from the NCLEX
