Answer:
15.75 m
Explanation:
First, let's look at the top brick by itself. In order for it not to tip over the bottom brick, its center of gravity must be right at the edge of the bottom brick. So the edge of the top brick must be 10.5 m from the edge of the bottom brick.
Now let's look at both bricks as a combined mass. We know the total length of this combined brick is 10.5 m + 21 m = 31.5 m. And we know that for it to not tip over the edge of the surface, its center of gravity must be at the edge. So the edge of the combined brick must be 31.5 m / 2 = 15.75 m from the edge of the surface.
Answer:
40 V
Explanation:
I will assume that the resistors are
100 and 3900 and 1000 OHMS <=====(NOT W)
In series , the resistances add together 100 + 3900 + 1000 = 5000 ohms total
V = IR
I = V / R so the total current will be 200 v / 5000 ohms = .04 amps
this is the current through all of the resistors
so for the 1000 ohm resistor V = IR .04 (1000) = 40 V
Answer:
Natural selection is a simple mechanism that causes populations of living things to change over time. Organisms that are more adapted to their environment are more likely to survive and pass on the genes that aided their success.
Explanation:
It is known that relation between torque and angular acceleration is as follows.
and, I =
So,
= 4
So,
= 1
as
=
Hence,
Thus, we can conclude that the new rotation is times that of the first rotation rate.