Answer:
Tension at the bottom of the swing T = 52.794N
Explanation:
Detailed explanation and calculation is shown in the image below
Answer:
Tires.
Explanation:
There are the few steps which are discussed below should be taken to increase or extend the life of tires.
(1) Avoid fast starts: Fast start of the vehicle will increase the pressure on the tires due to the friction between the tires and the road will decrease the life of tires.
(2) Avoid fast stop: Fast stop of the vehicle will also increase the pressure on the tires due to the friction between the tires and the road will decrease the life of tires.
(3) Avoid sharp turns: The alignment of the wheels and tires are in such a way that they work properly when vehicle is drive in a straight path but sharp turn will increase the uneven pressure on the tires will lead to decrease the life of tires.
Therefore, the life of tires can be extend by avoiding all the above mention actions such as fast stop, start and sharp turns.
How do you calculate distance over speed?
Image result for if your going 30 m/s to go somewhere thats 1680 miles away
The formula can be rearranged in three ways:
speed = distance ÷ time.
distance = speed × time.
time = distance ÷ speed.
1680÷30 = 56
So it would take around 56 minutes to get to Kroger.
I hope this helps !! :)
In electricity, the most famous and basic equation is the Ohm's Law which relates the parameters voltage, current and resistance. One form of this law as written in equation is V = IR, where V is the voltage in volts, I is the current in amperes and R is the resistance in ohms. These parameters depends in the arrangements, whether it's series or parallel.
In a series connection, the voltage is greater across a high-resistance resistor. Therefore, the voltage is much greater for the 20-ohm resistor. However,if it is a parallel circuit, the voltage is just the same for both resistors.
Given that the function of the wave is f(x) = cos(π•t/2), we have;
a. The graph of the function is attached
b. 4 units of time
c. Even
d. 4.935 J/kg
e. 1.234 W/kg
<h3>How can the factors of the wave be found?</h3>
a. Please find attached the graph of the signal created with GeoGebra
b. The period of the signal, T = 2•π/(π/2) = <u>4</u>
c. The signal is <u>even</u>, given that it is symmetrical about the y-axis
d. The energy of the signal is given by the formula;
Which gives;
E = 0.5 × 1.571² × 1² × 4 = <u>4.935 J/kg</u>
e. The power of the wave is given by the formula;
E = 0.5 × 1.571² × 1² × 4 × 0.25 = <u>1.234 W/</u><u>kg</u>
Learn more about waves here:
brainly.com/question/14015797