Answer:
here
Explanation:
Copper is commonly used as an effective conductor in household appliances and in electrical equipment in general. Because of its low cost, most wires are copper-plated. You will often find electromagnet cores normally wrapped with copper wire
Odpowiedź:
0,049 m / s
Wyjaśnienie:
Biorąc pod uwagę, że:
Dystans biegu = 900m
Czas trwania = 205 minut
Długość przejścia = 300 m
Zajęty czas = 205 minut
Średnia prędkość :
(Przebieg + pokonany dystans) / całkowity czas
Średnia prędkość :
(900 m +. 300 m) / 205 + 205
1200 m / 410 minut
Minuty do sekund
1200 / (410 * 60)
1200/24600
= 0,0487804
= 0,049 m / s
Answer:
T = 2 T₀
Explanation:
To answer this question let's write the expression for electrical conductivity
σ = n e2 τ / m*
The relationship with resistivity is
ρ = 1 /σ
Whereby the resistance
R = ρ L / A = 1 /σ L / A
We see that there is no explicit relationship between time and resistance, there is only a dependence on the life time (τ) that depends on the properties of the material, not on its diameter or length.
As also the average velocity or electron velocity of electrons is constant, the time to cross 2 mm in length is twice as long as the time to cross a mm in length
T = 2 T₀
<span>The proper </span><span>battery cable connection when jumping two automotive batteries is : </span><span>(a) negative to negative / positive to positive.
</span><span>Connect the red (positive) cable from the car with the bad battery to the red (positive) on the good battery. </span>
<span>Then connect the black (negative) from the good battery to a grounding point on the other car which should be tightened and metal should be clean.
</span>
<span>Once the car with bad battery has started, the removal of the cable should be in the opposite order. The Red (positive) which was the the First Cable to go on should be the last cable to be taken off.</span>
speed, volume, mass, temperature and power