Volume of the cone = 56.52 in³
Solution:
Diameter of the cone = 6 in
Radius of the cone = 6 ÷ 2 = 3 in
Height of the cone = 6 in
The value of π = 3.14
<u>To find the volume of the cone:</u>
Volume of the cone =
= 56.52
Volume of the cone = 56.52 in³
Hence the volume of the given cone is 56.52 .
A) The greatest rectangular area will be the area of a square 10 m on each side, 100 m^2.
b) The new dimensions will be 11 m × 11 m.
.. The new area will be (11 m)^2 = 121 m^2.
c) The area was increased by 121 m^2 -100 m^2 = 21 m^2, or 21%.
d) Yes, and no.
.. If you increase the dimensions by 10%, the area will increase by 21%.
.. (40 m)^2 = 1600 m^2
.. (44 m)^2 = 1936 m^2 = 1.21*(1600 m^2), an increase of 21% over the original.
.. If you increase the dimensions by 1 unit, the area will increase by (2x+1) square units, where x is the side of the original. For x≠10, this is not 21 square units.
.. (41 m)^2 = 1681 m^2 = 1600 m^2 +(2*40 +1) m^2 = 1600 m^2 +81 m^2
Answer: 0.43ft²
Step-by-step explanation:
You didn't really specify part A but In assuming that the question you posted is part A. Anyways in this case, area will be calculated by multiplying the length by the width.
Since the piece of wood has a length that is 2.45 feet and width that is 2.097 inches, then the area will be:
= 2.45 × 0.17475
= 0.4281375 ft²
= 0.43ft² to nearest hundredths
Note 1 foot = 12 inches
Therefore, 2.097 inches = 2.097/12 = 0.17475 feet
Answer:
11
Step-by-step explanation:
Answer:
Step-by-step explanation:
a) D/280 = tan(90 - 6)
D = 280tan84 = 2,664 ft
b) D/280 = tan(90 - 16)
D = 280tan74 = 976 ft
ship speed = (2664 - 976) / 43 = 39.2 ft/s