Answer is: key
design change for HFC-134a A/C systems versus CFC-12 A/C systems was quick
couple service fitting and that design reduce venting and mixing of
refrigerants during service.
<span>
Level of contamination is also reduced
and the emission of refrigerants and greenhouse gases (sulfur
dioxide, carbon dioxide) is also reduced.</span>
Answer:
I could create a slower reaction because the particles might be moving slower due to the cold. if it was warm there will be a faster reaction. similar to the elements movements in solids and liquids.
The correct answers are as follows:
1. Aluminium will not be useful as food wrapping if it has a much lower melting point.
Aluminum is a metallic element that is malleable and soft, thus, it is easy to beat it into thin sheet, which are used to package food. The thin sheet is called aluminium foil. Aluminum is useful as a food wrapping because it has high temperature and thus, it does not react with food (the hotness of the packaged food is not capable of melting the metal). If the melting point of aluminium is lower, this implies that little temperature, such as the one from hot food will be able to melt aluminum foil, thus allowing the food to be contaminated with the metal.
2. When bleach react with fabric dye chemical change occur in the fabric.
The major element in bleach is chlorine. When laundry bleach is added to a fabric, the chlorine component of the bleach will react with the fabric dye and cause a colour change in the fabric. This type of change is called chemical change, because the original colour of the fabric can not be recovered.
3. Every substance has specific properties, which can be used to identify it. Two of such specific properties are melting point and boiling point. Melting point refers to a specific temperature at which a solid substance will melt while boiling point refers to a specific temperature at which a liquid substance will boil and turn to steam.
Water for instance has a boiling point of 100 degree Celsius. To find out if an unknown substance is water, one can determine the boiling point of such liquid. A boiling point of 100 degree Celsius will strongly signify that the substance is probably water. The same thing applies to melting point. If the specific boiling and melting point of substances are known, then they can be used to identify them.
The answer to the molar mass of Ca(NO3)2 is gonna be C. 164.1 g/mol
Answer:
2H2 + O2 -----> 2H2O
Not sure about the second question though.
