Deposition occurs when gravity's downward pull on sediment is greater than the push of flowing water<span> or wind. Rivers and streams erode soil, rock, and sediment. Sediment is tiny grains of broken-down rock.</span>
Answer:
The y-axis should be labelled as W in Newtons (kg·m/s²)
Explanation:
The given data is presented here as follows;
Mass (kg) Newtons (kg·m/s²)
3.2 31.381
4.6 45.1111
6.1 59.821
7.4 72.569
9 89.241
10.4 101.989
10.9 106.892
From the table, it can be seen that there is a nearly linear relationship between the amount of Newtons and the mass, as the slope of the data has a relatively constant slope
Therefore, the data can be said to be a function of Weight in Newtons to the mass in kilograms such that the weight depends on the mass as follows;
W(m) in Newtons = Mass, m in kg × g
Where;
g is the constant of proportionality
Therefore, the y-axis component which is the dependent variable is the function, W(m) = Weight of the body while the x-axis component which is the independent variable is the mass. m
The graph of the data is created with Microsoft Excel give the slope which is the constant of proportionality, g = 9.8379, which is the acceleration due to gravity g ≈ 9.8 m/s²
We therefore label the y-axis as W in Newtons (kg·m/s²)
Answer:
power emitted is 1.75 W
Explanation:
given data
length l = 5 cm = 5 × m
diameter d = 0.074 cm = 74 × m
total filament emissivity = 0.300
temperature = 3068 K
to find out
power emitted
solution
we find first area that is π×d×L
area = π×d×L
area = π×74 ××5 ×
area = 1162.3892 × m²
so here power emitted is express as
power emitted = E × σ × area × (temperature)^4
put here all value
power emitted = 0.300× 5.67 × 1162.3892 × × (3068)^4
power emitted = 1.75 W
A. is the right answer since work is negative and Q which is heat in negative also