Answer:
3. they can travel through solids
4. they move rock at right angles to the direction of wave travel
Explanation:
- S waves are called transverse waves they have the ability to move past the solids. They cannot move through the liquids, these waves are perpendicular to the direction of travel.
- They are also called longitudinal waves, the ad is second to record on the seismograph as they slowly pass through the rocks. They have a speed of 3.4 to 7.2 km as per the boundary.
<h2>
Answer:</h2>
<u>Friction:</u>
When an object slips on a surface, an opposing force acts between the tangent planes which acts in the opposite direction of motion. This opposing force is called Friction. Or in other words, Friction is the opposing force that opposes the motion between two surfaces.
The main component of friction are:
<u>Normal Reaction (R):
</u>
Suppose a block is placed on a table in the above picture, which is in resting state, then two forces are acting on it at that time.
The first is due to its weight mg which is working from its center of gravity towards the vertical bottom.
The second one is superimposed vertically upwards by the table on the block, called the reaction force (P). This force passes through the center of gravity of the block.
Due to P = mg, the box is in equilibrium position on the table.
<u>Coefficient of friction ( </u>μ )<u>:
</u>
The ratio of the force of friction and the reaction force is called the coefficient of friction.
Coefficient of friction, µ = force of friction / reaction force
μ = F / R
The coefficient of friction is volume less and dimensionless.
Its value is between 0 to 1.
<u>Advantage and disadvantage from friction force:
</u>
- The advantage of the force of friction is that due to friction, we can walk on the earth without slipping.
- Brakes in all vehicles are due to the force of friction.
- We can write on the board only because of the force of friction.
- The disadvantage of this force is that due to friction, some parts of energy are lost in the machines and there is wear and tear on the machines.
<u>How to reduce friction:
</u>
- Using lubricants (oil or grease) in machines.
- Friction can be reduced by using ball bearings etc.
- Using a soap solution and powder.
Organelles are small structures found in cells that carry out certain tasks. Two examples of organelles are the Nucleus and the Mitochondria. Think of the nucleus as the brain of its cell, it controls activities and it contains a majority of the cells genetic material. The mitochondria is the part of the cells tasked with cellular respiration, which is the act of taking nutrients from a cell and turning it into energy.
Answer:
P = 1 (14,045 ± 0.03 ) k gm/s
Explanation:
In this exercise we are asked about the uncertainty of the momentum of the two carriages
Δ (Pₓ / Py) =?
Let's start by finding the momentum of each vehicle
car X
Pₓ = m vₓ
Pₓ = 2.34 2.5
Pₓ = 5.85 kg m
car Y
Py = 2,561 3.2
Py = 8,195 kgm
How do we calculate the absolute uncertainty at the two moments?
ΔPₓ = m Δv + v Δm
ΔPₓ = 2.34 0.01 + 2.561 0.01
ΔPₓ = 0.05 kg m
Δ = m Δv + v Δm
ΔP_{y} = 2,561 0.01+ 3.2 0.001
ΔP_{y} = 0.03 kg m
now we have the uncertainty of each moment
P = Pₓ /
ΔP = ΔPₓ/P_{y} + Pₓ ΔP_{y} / P_{y}²
ΔP = 8,195 0.05 + 5.85 0.03 / 8,195²
ΔP = 0.006 + 0.0026
ΔP = 0.009 kg m
The result is
P = 14,045 ± 0.039 = (14,045 ± 0.03 ) k gm/s
Answer:
The magnitude of the acceleration is
The direction is north of east
Explanation:
From the question we are told that
The force exerted by the wind is
The force exerted by water is
The mass of the boat(+ crew) is
Now Force is mathematically represented as
Now the acceleration towards the north is mathematically represented as
substituting values
Now the acceleration towards the east is mathematically represented as
substituting values
The resultant acceleration is
substituting values
The direction with reference from the north is evaluated as
Apply SOHCAHTOA
substituting values